FAQ

Location:HOME > News Center > FAQ
  • 2014-08-23Fastener maintenance should pay attention to six points
    As an important component of mechanical fasteners, must be regular maintenance, such ability are fasteners play better performance, and is the machinery for normal operation...
  • 2014-08-23Fastener gasket classification and characteristics
    Fasteners in the use process, in order to make the mechanical seal between parts, we will use a gasket to seal, can also prevent between two objects under pressure, cor...
  • 2014-08-23Self tapping screw has five main characteristics
    Self tapping screws than ordinary screw using more advanced, without tapping hole drilling and tapping screw, a screw and general different, head is pointed, tooth distance...
  • 2014-08-23Note the welding nut
    Although the weld nut strength, not easy to loose, but in the use of the process also need to pay attention to some matters, so that the weld nut connected using. The...
  • 2014-08-23Analysis of surface type fastener
    We often hear the fastener surface treatment is required after the use of better, why the fastener surface treatment is required, the fastener surface treatment which have...
  • 2014-08-23Common fastener cleaning six problems
    In order to fasteners can be better use, we in the use of fasteners, need regular maintenance on a regular basis, such as fasteners for cleaning, it can improve the ef...
  • 2014-08-23Hot dip galvanized fastener has the advantages
    We can often hear to be hot dip galvanized screw, nut, bolt and other fasteners, hot dip galvanized belongs to a technology for processing metal surface, mainly is to i...
  • 2014-08-23The bolt preventive measures
    ① every time you run 12000km two level maintenance, should remove the engine oil bottom shell, check the engine bearing is used, if it is found that the individual bea...
8 records 1/1 page